c-stat_logo.gif (834 bytes)

CAD/CAM Dental Continuing Education
8505 Navajo Rd     San Diego,   CA   92119-2001 
 1-888-237-3228 or 619-828-1660

Return To Course Offerings        Course Schedules        Contact Us       CAD/CAM Photo Album        Products     The C-Stat      Home

C-Stat Main Page     Blue     Red       Orange      Green     Purple    Yellow   Black   Sterilization      General Usage     Order Info

c-stat_logo.gif (834 bytes)   C-STAT  General Use & Precautions

  • The inside of the support should not touch the camera prism while you slide the support on the camera.
     

  • Make sure that the inside of the support is free of white impression powder, so that the lens is not scratched.
     

  • In most cases you can lay the camera with the sliding support on the CEREC machine. But be cautious if you lay down a support with a wax impression when using the Anagonist or Correlation programs. In this case it is recommended that you remove the support before putting back the camera. Then the camera is secure and the wax impression will not be damaged.
     

  • Press the warmed wax or bite registration paste on the perforated rest base of the Green or Purple C-Stat and shape it with a wax knife or a scalpel.  To prevent the prism from being smudged, cut away the excess on the inside of the support being careful not to damage the lens.
     

The manufacturer or distributor are not responsible for errors or damage
 resulting from incorrect use of the C-STAT support.